Category: Civil Solutions

PVC waterstop acts as a continuous watertight diaphragm to prevent any flow of liquids in constructions joints which are subject to hydrostatic pressure. These materials are designed for expansion or contraction joint.

Used for the reinforcement of brick and block masonry to give improved tensile strength to walls subjected to lateral loading .

Blockwork Accessories They are made of smooth or deformed reinforcement steel bars, usually 4 mm in diameter. It comes as painted, mill galvanized, and hot-dip galvanized. They can be manufactured from stainless-steel 4 mm diameter stainless steel bars, too.

• PolyboardThis product does not absorb water, which adds to the impermeability of the waterproofing membrane.

Extruded Polystyrene (XPS), is manufactured via an extrusion process where plastic resin and other additives are combined and extruded .The primary purpose of thermal insulation is to minimize heat flow . Insulation system reduces the heat transfer through the envelope of a building.. Extruded polystyrene has a high resistance to water absorption.

Filler Boards are dry and clean, and cannot extrude any form of staining matter. They are resistant to moisture penetration and ice formation in the joint. They are immune to dry and wet rot, fungus and most forms of insect attack or similar forms of deterioration.

Our polyethylene sheets are available in roll form and available in different width ranges .  

Filler Boards are dry and clean, and cannot extrude any form of staining matter. They are resistant to moisture penetration and ice formation in the joint. They are immune to dry and wet rot, fungus and most forms of insect attack or similar forms of deterioration.

EPS Insulation EPS (Expanded PolyStyrene) is a white foam plastic substance made from solid polystyrene beads. EPS is a lightweight material with good thermal conductivity, low moisture absorption, and excellent cushioning.